[Grml] ssh server with grml_2011.12-rc1

[John G. Heim]

From: "Ulrich Dangel" <mru at grml.org>
To: <grml at ml.grml.org>
Sent: Wednesday, December 14, 2011 2:54 PM
Subject: Re: [Grml] ssh server with grml_2011.12-rc1


>* John Heim wrote [14.12.11 21:41]:
> Hi,
>> Well, I can ping it. I checked it with nmap and found that only
>> port 111 is open.  (see below.) I'm about as sure as I can be that
>> I'm typing 'grml ssh=bogus' at the boot prompt. I've done it about a
>> million times with previous grml releases.  Later this afternoon I
>> may be able to get sighted assistance.
>
> If you have access to the system you can just read /proc/cmdline to
> get the commandline.

I'm guessing I'm doing something wrong. Here's the contents of 
/proc/cmdline... Note that it does not contain what I typed. I think the 
problem is that I have to press some down arrows and/or tabs when the disk 
stops spinning. I have just been typing my grml command...

initrd=/boot/grml/initrd.gz boot=live bootid=grml201112rc1 apm=power-off 
vga=791 quiet nomce grml ssh=bogus BOOT_IMAGE=/boot/grml/linux26


> We are currently thinking about adding a beep after the bootloader is
> loaded. Hopefully this will help to add customized parameters to the
> commandline.


That would be very nice.
> Ulrich
> -- 
> twitter: @mr_ud  | identica: @mru
> IRCNet:  mru     | freenode: mrud
> _______________________________________________
> Grml mailing list - Grml at ml.grml.org
> http://ml.grml.org/mailman/listinfo/grml
> join #grml on irc.freenode.org
> grml-devel-blog: http://blog.grml.org/
>
>