[issue1196] network boot fails with daily image
Marc 'Zugschlus' Haber
bts at bts.grml.org
Thu Jul 12 17:13:31 CEST 2012
New submission from Marc 'Zugschlus' Haber <mh+bts-grml at zugschlus.de>:
Hi,
----------
files: daily.bootlog
messages: 4412
nosy: zugschlus
priority: bug
status: unread
title: network boot fails with daily image
_____________________________________
GRML issue tracker <bts at bts.grml.org>
<http://bts.grml.org/grml/issue1196>
_____________________________________
-------------- next part --------------
[17/516]mhaber at lxka-zugschlus:~/boot$ nc -l -p 4555
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.0-3-grml-amd64 (Debian 3.3.7-1+grml.2) (team at grml.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Fri May 25 23:30:37 UTC 2012
[ 0.000000] Command line: fetch=http://192.168.19.254/boot/grml64-small_testing.squashfs quiet boot=live lang=us nomce apm=power-off noprompt noeject vga=791 debug=1 serial console=ttyS0,57600n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fffe000 (usable)
[ 0.000000] BIOS-e820: 000000007fffe000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fffe max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [ffff8800000fdad0] fdad0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fffe000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fffe000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 7e800000 - 7f275000
[ 0.000000] ACPI: RSDP 00000000000fd940 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000007fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000007fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000007fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 000000007fffff40 00040
[ 0.000000] ACPI: SSDT 000000007ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000007ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000007ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: SSDT 000000007ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fffe000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007fffe000
[ 0.000000] NODE_DATA [000000007fff9000 - 000000007fffdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1699381, boot clock
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007c800000-ffff88007e3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fffe
[ 0.000000] On node 0 totalpages: 524173
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 9 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7112 pages used for memmap
[ 0.000000] DMA32 zone: 513078 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7effc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82048 r8192 d24448 u1048576
[ 0.000000] pcpu-alloc: s82048 r8192 d24448 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 0:7fc13381, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 7fc0e000
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516996
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: fetch=http://192.168.19.254/boot/grml64-small_testing.squashfs quiet boot=live lang=us nomce apm=power-off noprompt noeject vga=791 debug=1 serial console=ttyS0,57600n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2048556k/2097144k available (3554k kernel code, 452k absent, 48136k reserved, 3121k data, 580k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 3066.666 MHz processor.
[ 0.004000] Calibrating delay loop (skipped) preset value.. 6133.33 BogoMIPS (lpj=12266664)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004010] AppArmor: AppArmor disabled by boot time parameter
[ 0.005083] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006604] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008103] Mount-cache hash table entries: 256
[ 0.008966] Initializing cgroup subsys cpuacct
[ 0.009711] Initializing cgroup subsys memory
[ 0.010435] Initializing cgroup subsys devices
[ 0.011162] Initializing cgroup subsys freezer
[ 0.011887] Initializing cgroup subsys net_cls
[ 0.012008] Initializing cgroup subsys blkio
[ 0.012714] Initializing cgroup subsys perf_event
[ 0.014483] ACPI: Core revision 20120111
[ 0.017680] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018753] CPU0: Intel QEMU Virtual CPU version 1.1.0 stepping 03
[ 0.020001] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.020001] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.020001] Booting Node 0, Processors #1 Ok.
[ 0.020001] smpboot cpu 1: start_ip = 96000
[ 0.036007] kvm-clock: cpu 1, msr 0:7fd13381, secondary cpu clock
[ 0.036040] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.036062] Brought up 2 CPUs
[ 0.036063] Total of 2 processors activated (12266.66 BogoMIPS).
[ 0.036060] KVM setup async PF for cpu 1
[ 0.036060] kvm-stealtime: cpu 1, msr 7fd0e000
[ 0.044455] devtmpfs: initialized
[ 0.046810] print_constraints: dummy:
[ 0.048156] NET: Registered protocol family 16
[ 0.049004] ACPI: bus type pci registered
[ 0.049776] PCI: Using configuration type 1 for base access
[ 0.051206] bio: create slab <bio-0> at 0
[ 0.052227] ACPI: Added _OSI(Module Device)
[ 0.052777] ACPI: Added _OSI(Processor Device)
[ 0.053699] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.054614] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.056411] ACPI: EC: Look up EC in DSDT
[ 0.058854] ACPI: Interpreter enabled
[ 0.059460] ACPI: (supports S0 S3 S4 S5)
[ 0.060310] ACPI: Using IOAPIC for interrupt routing
[ 0.064253] ACPI: No dock devices found.
[ 0.064887] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.066440] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.067460] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.068007] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.069222] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.070537] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.072007] PCI: root bus 00: using default resources
[ 0.072863] PCI host bridge to bus 0000:00
[ 0.073549] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.074545] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.076038] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.077218] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.078469] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.081105] pci 0000:00:01.1: reg 20: [io 0xc060-0xc06f]
[ 0.082706] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.085253] pci 0000:00:01.2: reg 20: [io 0xc000-0xc01f]
[ 0.086817] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.088284] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.089418] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.090679] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.093996] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.096421] pci 0000:00:02.0: reg 14: [mem 0xfebf4000-0xfebf4fff]
[ 0.101787] pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.103077] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.104648] pci 0000:00:03.0: reg 10: [io 0xc020-0xc03f]
[ 0.106118] pci 0000:00:03.0: reg 14: [mem 0xfebf5000-0xfebf5fff]
[ 0.110328] pci 0000:00:03.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.111577] pci 0000:00:04.0: [8086:2668] type 0 class 0x000403
[ 0.112359] pci 0000:00:04.0: reg 10: [mem 0xfebf0000-0xfebf3fff]
[ 0.116062] pci 0000:00:05.0: [1af4:1002] type 0 class 0x000500
[ 0.117338] pci 0000:00:05.0: reg 10: [io 0xc040-0xc05f]
[ 0.120231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.121755] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.125903] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.126961] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.128011] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.129059] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.130115] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.131292] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132012] vgaarb: loaded
[ 0.132436] vgaarb: bridge control possible 0000:00:02.0
[ 0.133364] PCI: Using ACPI for IRQ routing
[ 0.134015] PCI: pci_cache_line_size set to 64 bytes
[ 0.134961] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.136014] reserve RAM buffer: 000000007fffe000 - 000000007fffffff
[ 0.137298] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.138515] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.139377] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.148406] Switching to clocksource kvm-clock
[ 0.151313] pnp: PnP ACPI init
[ 0.151889] ACPI: bus type pnp registered
[ 0.152684] pnp 00:00: [bus 00-ff]
[ 0.153322] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.154070] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.154932] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.155731] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.156642] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.157565] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.158636] pnp 00:01: [io 0x0070-0x0071]
[ 0.159332] pnp 00:01: [irq 8]
[ 0.159843] pnp 00:01: [io 0x0072-0x0077]
[ 0.160558] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.161661] pnp 00:02: [io 0x0060]
[ 0.162273] pnp 00:02: [io 0x0064]
[ 0.162858] pnp 00:02: [irq 1]
[ 0.163384] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.164500] pnp 00:03: [irq 12]
[ 0.165031] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.166069] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.166745] pnp 00:04: [io 0x03f7]
[ 0.167325] pnp 00:04: [irq 6]
[ 0.167831] pnp 00:04: [dma 2]
[ 0.168389] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.169532] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.170227] pnp 00:05: [irq 4]
[ 0.170755] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.171928] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.172766] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.173983] pnp: PnP ACPI: found 7 devices
[ 0.174664] ACPI: ACPI bus type pnp unregistered
[ 0.184911] PCI: max bus depth: 0 pci_try_num: 1
[ 0.185637] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.186526] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.187698] NET: Registered protocol family 2
[ 0.188560] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.190561] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.194329] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.195996] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.197056] TCP reno registered
[ 0.197563] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.198565] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.199771] NET: Registered protocol family 1
[ 0.200510] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.201337] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.202279] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.203403] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.204473] pci 0000:00:02.0: Boot video device
[ 0.205245] PCI: CLS 0 bytes, default 64
[ 0.205950] Unpacking initramfs...
[ 1.308859] Freeing initrd memory: 10708k freed
[ 1.312029] audit: initializing netlink socket (disabled)
[ 1.312922] type=2000 audit(1342105753.308:1): initialized
[ 1.325979] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.327840] VFS: Disk quotas dquot_6.5.2
[ 1.328649] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.329778] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.330883] aufs 3.x-rcN-20120312
[ 1.331442] msgmni has been set to 4022
[ 1.332388] alg: No test for stdrng (krng)
[ 1.333115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.334312] io scheduler noop registered
[ 1.334987] io scheduler deadline registered
[ 1.335722] io scheduler cfq registered (default)
[ 1.336582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.337522] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.338592] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.339703] acpiphp: Slot [3] registered
[ 1.340388] acpiphp: Slot [4] registered
[ 1.341051] acpiphp: Slot [5] registered
[ 1.341715] acpiphp: Slot [6] registered
[ 1.342384] acpiphp: Slot [7] registered
[ 1.343046] acpiphp: Slot [8] registered
[ 1.343710] acpiphp: Slot [9] registered
[ 1.344452] acpiphp: Slot [10] registered
[ 1.345130] acpiphp: Slot [11] registered
[ 1.345811] acpiphp: Slot [12] registered
[ 1.346542] acpiphp: Slot [13] registered
[ 1.347223] acpiphp: Slot [14] registered
[ 1.347896] acpiphp: Slot [15] registered
[ 1.348593] acpiphp: Slot [16] registered
[ 1.349281] acpiphp: Slot [17] registered
[ 1.349966] acpiphp: Slot [18] registered
[ 1.350647] acpiphp: Slot [19] registered
[ 1.351325] acpiphp: Slot [20] registered
[ 1.352000] acpiphp: Slot [21] registered
[ 1.352732] acpiphp: Slot [22] registered
[ 1.353406] acpiphp: Slot [23] registered
[ 1.354076] acpiphp: Slot [24] registered
[ 1.354724] acpiphp: Slot [25] registered
[ 1.355401] acpiphp: Slot [26] registered
[ 1.356133] acpiphp: Slot [27] registered
[ 1.356774] acpiphp: Slot [28] registered
[ 1.357406] acpiphp: Slot [29] registered
[ 1.358082] acpiphp: Slot [30] registered
[ 1.358761] acpiphp: Slot [31] registered
[ 1.359536] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 1.360571] vesafb: scrolling: redraw
[ 1.361186] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.362191] vesafb: framebuffer at 0xfc000000, mapped to 0xffffc90000900000, using 3072k, total 4096k
[ 1.365307] Console: switching to colour frame buffer device 128x48
[ 1.367314] fb0: VESA VGA frame buffer device
[ 1.368063] GHES: HEST is not enabled!
[ 1.368803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.390946] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.413803] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.415091] Linux agpgart interface v0.103
[ 1.415800] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.417687] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.418477] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.419419] mousedev: PS/2 mouse device common for all mice
[ 1.420765] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.422323] rtc_cmos 00:01: RTC can wake from S4
[ 1.423550] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.425688] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.426963] cpuidle: using governor ladder
[ 1.427637] cpuidle: using governor menu
[ 1.428568] TCP cubic registered
[ 1.429228] NET: Registered protocol family 10
[ 1.430386] Mobile IPv6
[ 1.430811] NET: Registered protocol family 17
[ 1.431545] Registering the dns_resolver key type
[ 1.432458] PM: Hibernation image not present or could not be loaded.
[ 1.433537] registered taskstats version 1
[ 1.434585] rtc_cmos 00:01: setting system clock to 2012-07-12 15:09:12 UTC (1342105752)
[ 1.435924] Initializing network drop monitor service
[ 1.437870] Freeing unused kernel memory: 580k freed
[ 1.438919] Write protecting the kernel read-only data: 6144k
[ 1.441426] Freeing unused kernel memory: 524k freed
[ 1.443995] Freeing unused kernel memory: 564k freed
Loading, please wait...
+ [ -n ]
+ resume=
+ maybe_break top
+ [ = top ]
+ run_scripts /scripts/init-top
+ initdir=/scripts/init-top
+ [ ! -d /scripts/init-top ]
+ [ -f /scripts/init-top/ORDER ]
+ . /scripts/init-top/ORDER
+ /scripts/init-top/all_generic_ide
+ [ -e /conf/param.conf ]
+ /scripts/init-top/blacklist
+ [ -e /conf/param.conf ]
+ /scripts/init-top/grml
debug: scripts/init-top/grml running
Welcome to
____ _
/ ___| _ __ _____ | |
| | _ | / /| || |
| |_| || / | | | || |
\____||_| |_|_|_||_|
Grml Live Linux - http://grml.org/
* Running grml64-small_testing 20120706 Release Codename autobuild-20120706 [2012-07-06]
* Finished early booting sequence. [ ok ]
* Searching for GRML file, this might take a few seconds...
+ [ -e /conf/param.conf ]
+ /scripts/init-top/keymap
+ [ -e /conf/param.conf ]
+ /scripts/init-top/udev
[ 1.475993] udevd[56]: starting version 175
[ 1.492271] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 1.493808] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 1.494893] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 1.495846] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 1.497371] SCSI subsystem initialized
[ 1.499890] usbcore: registered new interface driver usbfs
[ 1.505796] usbcore: registered new interface driver hub
[ 1.507761] usbcore: registered new device driver usb
[ 1.509103] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.510461] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.512259] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 1.513202] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.515103] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.515909] libata version 3.00 loaded.
[ 1.517581] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.518874] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c000
[ 1.519859] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.521405] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.522716] usb usb1: Product: UHCI Host Controller
[ 1.523633] usb usb1: Manufacturer: Linux 3.3.0-3-grml-amd64 uhci_hcd
[ 1.525240] usb usb1: SerialNumber: 0000:00:01.2
[ 1.529089] ACPI: Power Button [PWRF]
[ 1.529974] hub 1-0:1.0: USB hub found
[ 1.530813] hub 1-0:1.0: 2 ports detected
[ 1.531593] ata_piix 0000:00:01.1: version 2.13
[ 1.532657] ata_piix 0000:00:01.1: setting latency timer to 64
[ 1.534226] scsi0 : ata_piix
[ 1.534793] scsi1 : ata_piix
[ 1.535449] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc060 irq 14
[ 1.536611] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc068 irq 15
[ 1.541614] virtio-pci 0000:00:03.0: irq 40 for MSI/MSI-X
[ 1.542600] virtio-pci 0000:00:03.0: irq 41 for MSI/MSI-X
[ 1.543536] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
[ 1.544907] FDC 0 is a S82078B
[ 1.693381] ata2.01: NODEV after polling detection
[ 1.696683] ata2.00: ATAPI: QEMU DVD-ROM, 1.1.0, max UDMA/100
[ 1.699956] ata2.00: configured for MWDMA2
[ 1.702379] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.1. PQ: 0 ANSI: 5
[ 1.712609] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.714478] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.716370] sr 1:0:0:0: Attached scsi CD-ROM sr0
+ [ -e /conf/param.conf ]
+ maybe_break modules
+ [ = modules ]
+ [ n != y ]
+ log_begin_msg Loading essential drivers
+ _log_msg Begin: Loading essential drivers ...
+ [ n = y ]
+ printf Begin: Loading essential drivers ...
Begin: Loading essential drivers ... + load_modules
+ [ -e /conf/modules ]
+ cat /conf/modules
+ read m
+ [ -z dm-mod ]
+ printf %.1s dm-mod
+ com=d
+ [ d = # ]
+ modprobe dm-mod
[ 1.827145] device-mapper: uevent: version 1.0.3
[ 1.828312] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
+ read m
+ [ -z dm-mirror ]
+ printf %.1s dm-mirror
+ com=d
+ [ d = # ]
+ modprobe dm-mirror
+ read m
+ [ -z dm-raid45 ]
+ printf %.1s dm-raid45
+ com=d
+ [ d = # ]
+ modprobe dm-raid45
modprobe: module dm-raid45 not found in modules.dep
+ read m
+ [ -z unix ]
+ printf %.1s unix
+ com=u
+ [ u = # ]
+ modprobe unix
modprobe: module unix not found in modules.dep
+ read m
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ [ -n ]
+ maybe_break premount
+ [ = premount ]
+ [ n != y ]
+ log_begin_msg Running /scripts/init-premount
+ _log_msg Begin: Running /scripts/init-premount ...
+ [ n = y ]
+ printf Begin: Running /scripts/init-premount ...
Begin: Running /scripts/init-premount ... + run_scripts /scripts/init-premount
+ initdir=/scripts/init-premount
+ [ ! -d /scripts/init-premount ]
+ return
+ [ n != y ]
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ maybe_break mount
+ [ = mount ]
+ log_begin_msg Mounting root file system
+ _log_msg Begin: Mounting root file system ...
+ [ n = y ]
+ printf Begin: Mounting root file system ...
Begin: Mounting root file system ... + . /scripts/live
+ export PATH=/root/usr/bin:/root/usr/sbin:/root/bin:/root/sbin:/usr/bin:/usr/sbin:/bin:/sbin
+ echo /root/lib
+ echo /root/usr/lib
+ mountpoint=/live/image
+ alt_mountpoint=/media
+ LIVE_MEDIA_PATH=live
+ HOSTNAME=grml
+ mkdir -p /live/image
+ tried=/tmp/tried
+ [ ! -d /etc ]
+ [ ! -f /etc/mtab ]
+ touch /etc/mtab
+ . /scripts/live-helpers
+ [ ! -x /bin/fstype ]
+ [ -x /sbin/udevadm ]
+ udevinfo=/sbin/udevadm info
+ old_root_overlay_label=live-rw
+ old_home_overlay_label=home-rw
+ custom_overlay_label=custom-ov
+ root_snapshot_label=live-sn
+ old_root_snapshot_label=live-sn
+ home_snapshot_label=home-sn
+ persistence_list=live-persistence.conf
+ [ ! -f /live.vars ]
+ touch /live.vars
+ parse_numeric
+ return
+ maybe_break mountroot
+ [ = mountroot ]
+ mountroot
+ [ -x /scripts/local-top/cryptroot ]
+ /scripts/local-top/cryptroot
+ exec
+ exec
+ exec
+ exec
+ tailpid=160
+ . /scripts/live-functions
+ tail. /scripts/functions
[ 2.308232] Refined TSC clocksource calibration: 3066.647 MHz.
+ . /live.vars
+ Arguments
+ PRESEEDS=
+ LOCATIONS=
+ cat /proc/cmdline
+ FETCH=http://192.168.19.254/boot/grml64-small_testing.squashfs
+ export FETCH
+ NOPROMPT=Yes
+ export NOPROMPT
+ DEFCONSOLE=ttyS0,57600n8
+ export DEFCONSOLE
+ [ -z ]
+ [ = /dev/nfs ]
+ [ = /dev/cifs ]
+ [ -z ]
+ MODULE=filesystem
+ export MODULE
+ [ -z ]
+ UNIONTYPE=aufs
+ export UNIONTYPE
+ [ -z ]
+ PERSISTENCE_ENCRYPTION=none
+ export PERSISTENCE_ENCRYPTION
+ [ -z ]
+ PERSISTENCE_METHOD=snapshot,overlay
+ export PERSISTENCE_METHOD
+ [ -z ]
+ PERSISTENCE_STORAGE=filesystem,file
+ export PERSISTENCE_STORAGE
+ maybe_break live-premount
+ [ = live-premount ]
+ log_begin_msg Running /scripts/live-premount
+ _log_msg Begin: Running /scripts/live-premount ...
+ [ n = y ]
+ printf Begin: Running /scripts/live-premount ...
Begin: Running /scripts/live-premount ... + run_scripts /scripts/live-premount
+ initdir=/scripts/live-premount
+ [ ! -d /scripts/live-premount ]
+ [ -f /scripts/live-premount/ORDER ]
+ . /scripts/live-premount/ORDER
+ /scripts/live-premount/select_eth_device
Waiting for ethernet card(s) up... If this fails, maybe the ethernet card is not supported by the kernel 3.3.0-3-grml-amd64?
+ [ -e /conf/param.conf ]
+ . /conf/param.conf
+ DEVICE=eth0
+ /scripts/live-premount/readonly
+ [ -e /conf/param.conf ]
+ . /conf/param.conf
+ DEVICE=eth0
+ /scripts/live-premount/modules
+ [ -e /conf/param.conf ]
+ . /conf/param.conf
+ DEVICE=eth0
+ log_end_msg
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ [ ! -z ]
+ [ ! -z http://192.168.19.254/boot/grml64-small_testing.squashfs ]
+ do_netmount
+ do_netsetup
+ modprobe -q af_packet
+ udevadm trigger
+ udevadm settle
+ [ -n ]
+ ETHDEV_TIMEOUT=15
+ echo Using timeout of 15 seconds for network configuration.
Using timeout of 15 seconds for network configuration.
+ cd /sys/class/net/
+ grep+ ^lo$ls -1
+ ALLDEVICES=eth0
+ echo Net: Turning on all device links...
Net: Turning on all device links...
+ ipconfig -c none -d eth0 -t 1
+ [ -n ]
+ [ -z ]
+ echo If you want to boot from a specific device use bootoption ethdevice=...
If you want to boot from a specific device use bootoption ethdevice=...
+ ETHDEVICE=eth0
+ echo eth0
+ sed s/,/ /g
+ devlist= eth0
+ get_ipconfig_para eth0
+ [ 1 != 1 ]
+ devname=eth0
+ echo eth0
+ param=eth0
+ [ -n ]
+ echo Executing ipconfig -t 15 eth0
Executing ipconfig -t 15 eth0
+ ipconfig -t 15 eth0
+ tee -a /netboot.config
[ 3.034947] Kernel panic - not syncing: Attempted to kill init!
[ 3.036885] Pid: 1, comm: init Not tainted 3.3.0-3-grml-amd64 #1
[ 3.038742] Call Trace:
[ 3.039520] [<ffffffff8136a91a>] ? panic+0xc1/0x1ce
[ 3.041208] [<ffffffff8103b9ae>] ? do_exit+0x95/0x725
[ 3.042109] [<ffffffff8103c2bf>] ? do_group_exit+0x75/0x9f
[ 3.043013] [<ffffffff8103c2f9>] ? sys_exit_group+0x10/0x10
[ 3.044289] [<ffffffff81375079>] ? system_call_fastpath+0x16/0x1b
^C
[18/517]mhaber at lxka-zugschlus:~/boot$
More information about the Bugs-changes
mailing list