[issue827] isofrom doesn't work on 2009.10
Marc 'Zugschlus' Haber
bts at bts.grml.org
Thu Mar 11 18:32:37 CET 2010
Marc 'Zugschlus' Haber <mh+bts-grml at zugschlus.de> added the comment:
history.0, result of
BOOT_IMAGE=(loop)/boot/grmlmedsid/linux26 quiet lang=de boot=live noeject
noprompt keyboard=de isofrom=/dev/cciss/c0d0p1/boot/grml/grml.iso toram=grml-
----------
assignedto: mika
files: history.0
messages: 3097, 3100, 3102, 3104, 3105
nosy: mika, zugschlus
priority: bug
status: testing
title: isofrom doesn't work on 2009.10
_____________________________________
GRML issue tracker <bts at bts.grml.org>
<http://bts.grml.org/grml/issue827>
_____________________________________
-------------- next part --------------
80 GB Installed
ProLiant System BIOS - A22 (02/09/2010)
Copyright 1982, 2010 Hewlett-Packard Development Company, L.P.
1 Six-Core AMD Opteron(tm) Processor 2435 @ 2.60 GHz (3 MB L2,6 MB L3)
2 Six-Core AMD Opteron(tm) Processor 2435 @ 2.60 GHz (3 MB L2,6 MB L3)
Power Regulator Mode: Dynamic Power Savings
Advanced Memory Protection Mode: Advanced ECC Support
Redundant ROM Detected - This system contains a valid backup system ROM.
Integrated Lights-Out 2 Standard
iLO 2 v1.81 Jan 15 2010 10.1.103.117
Slot 3 HP Smart Array P410 Controller (512MB, v2.72) 1 Logical Drive
SATA Option ROM ver 2.00.B08
Copyright 1982, 2008. Hewlett-Packard Development Company, L.P.
Port1: (CD-ROM) Optiarc DVD RW AD-7561S
Broadcom NetXtreme II Ethernet Boot Agent v4.4.16 <F9 = Setup>
Copyright (C) 2000-2008 Broadcom Corporation
All rights reserved.
Press Ctrl-S to Configure Device (MAC Address - 18A905502E0E)
Press "F9" key for ROM-Based Setup Utility
Press "F10" key for System Maintenance Menu
Press "F12" key for Network Boot
For access via BIOS Serial Console
Press "ESC+9" for ROM-Based Setup Utility
Press "ESC+0" for System Maintenance Menu
Press "ESC+@" for Network Boot
Booting a command listt [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33-grml (mika at grmlvrs) (gcc version 4.4.3 (Debian 4.4.3-2) ) #1 SMP PREEMPT Thu Mar 4 00:30:39 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe3e000 (usable) [ 0.000000] BIOS-e820: 00000000cfe3e000 - 00000000cfe46000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe46000 - 00000000cfe47000 (usable) [ 0.000000] BIOS-e820: 00000000cfe47000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000142ffff000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xcfe47 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000001430000000 aka 82688M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfe3e000 (usable)
[ 0.000000] modified: 00000000cfe3e000 - 00000000cfe46000 (ACPI data)
[ 0.000000] modified: 00000000cfe46000 - 00000000cfe47000 (usable)
[ 0.000000] modified: 00000000cfe47000 - 00000000e0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 000000142ffff000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f4f80] f4f80
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 376aa000 - 37fef375
[ 0.000000] Allocated new RAMDISK: 008a1000 - 011e6375
[ 0.000000] Move RAMDISK from 00000000376aa000 - 0000000037fef374 to 008a1000 - 011e6374
[ 0.000000] ACPI: RSDP 000f4f00 00024 (v02 HP )
[ 0.000000] ACPI: XSDT cfe3eec0 0009C (v01 HP ProLiant 00000002 �? 0000162E)
[ 0.000000] ACPI: FACP cfe3efc0 000F4 (v03 HP ProLiant 00000002 �? 0000162E)
[ 0.000000] ACPI: DSDT cfe3f0c0 0380A (v01 HP DSDT 00000001 INTL 20030228)
[ 0.000000] ACPI: FACS cfe3e140 00040
[ 0.000000] ACPI: SPCR cfe3e180 00050 (v01 HP SPCRRBSU 00000001 �? 0000162E)
[ 0.000000] ACPI: MCFG cfe3e200 0003C (v01 HP ProLiant 00000001 00000000)
[ 0.000000] ACPI: HPET cfe3e240 00038 (v01 HP ProLiant 00000002 �? 0000162E)
[ 0.000000] ACPI: SPMI cfe3e280 00040 (v05 HP ProLiant 00000001 �? 0000162E)
[ 0.000000] ACPI: ERST cfe3e2c0 001D0 (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.000000] ACPI: APIC cfe3e4c0 000CA (v01 HP ProLiant 00000002 00000000)
[ 0.000000] ACPI: SRAT cfe3e6c0 00190 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: FFFF cfe3eac0 00176 (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.000000] ACPI: BERT cfe3ec40 00030 (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.000000] ACPI: HEST cfe3ec80 0018C (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.000000] ACPI: FFFF cfe3ee40 00064 (v02 HP ProLiant 00000002 �? 0000162E)
[ 0.000000] ACPI: SSDT cfe42900 002F7 (v03 HP pci0pcie 00000001 INTL 20061109)
[ 0.000000] ACPI: SSDT cfe42c00 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
[ 0.000000] ACPI: SSDT cfe42d40 00086 (v03 HP CRSPCI1 00000002 HP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2438MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00016000 - 0001cf00
[ 0.000000] (14 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000100000 - 000089cb30] TEXT DATA BSS ==> [0000100000 - 000089cb30]
[ 0.000000] #3 [000089d000 - 00008a00ec] BRK ==> [000089d000 - 00008a00ec]
[ 0.000000] #4 [000009f400 - 00000f4f80] BIOS reserved ==> [000009f400 - 00000f4f80]
[ 0.000000] #5 [00000f4f80 - 00000f4f90] MP-table mpf ==> [00000f4f80 - 00000f4f90]
[ 0.000000] #6 [00000f4f90 - 00000ff91f] BIOS reserved ==> [00000f4f90 - 00000ff91f]
[ 0.000000] #7 [00000ffccb - 0000100000] BIOS reserved ==> [00000ffccb - 0000100000]
[ 0.000000] #8 [00000ff91f - 00000ffccb] MP-table mpc ==> [00000ff91f - 00000ffccb]
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
[ 0.000000] #12 [00008a1000 - 00011e6375] NEW RAMDISK ==> [00008a1000 - 00011e6375]
[ 0.000000] #13 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cfe47
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe3e
[ 0.000000] 0: 0x000cfe46 -> 0x000cfe47
[ 0.000000] On node 0 totalpages: 851408
[ 0.000000] free_area_init_node: node 0, pgdat c07375c0, node_mem_map c11e8000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3953 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4877 pages used for memmap
[ 0.000000] HighMem zone: 619316 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x920
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x4 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0xc ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0x5 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0xd ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1166a201 base: 0xfed00000
[ 0.000000] 12 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s34968 r0 d22376 u524288
[ 0.000000] pcpu-alloc: s34968 r0 d22376 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844755
[ 0.000000] Kernel command line: BOOT_IMAGE=(loop)/boot/grmlmedsid/linux26 quiet lang=de boot=live noeject noprompt keyboard=de isofrom=/dev/cciss/c0d0p1/boot/grml/grml.iso toram=grml-medium.squashfs serial console=ttyS0,115200n8 ssh=1234 ignore_bootid debug=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe47)
[ 0.000000] Memory: 3359004k/3406108k available (4185k kernel code, 45272k reserved, 2306k data, 620k init, 2496772k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0757000 - 0xc07f2000 ( 620 kB)
[ 0.000000] .data : 0xc051640f - 0xc0756e7c (2306 kB)
[ 0.000000] .text : 0xc0100000 - 0xc051640f (4185 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:880
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2600.036 MHz processor.
[ 0.006672] Calibrating delay loop (skipped), value calculated using timer frequency.. 5202.74 BogoMIPS (lpj=8666786)
[ 0.013350] Mount-cache hash table entries: 512
[ 0.016779] Initializing cgroup subsys debug
[ 0.020002] Initializing cgroup subsys ns
[ 0.023336] Initializing cgroup subsys cpuacct
[ 0.026670] Initializing cgroup subsys devices
[ 0.030002] Initializing cgroup subsys freezer
[ 0.033335] Initializing cgroup subsys net_cls
[ 0.036669] Initializing cgroup subsys blkio
[ 0.040022] CPU: Physical Processor ID: 0
[ 0.043335] CPU: Processor Core ID: 0
[ 0.046670] mce: CPU supports 6 MCE banks
[ 0.050009] using C1E aware idle routine
[ 0.053339] Performance Events: AMD PMU driver.
[ 0.060004] ... version: 0
[ 0.063335] ... bit width: 48
[ 0.066668] ... generic registers: 4
[ 0.070002] ... value mask: 0000ffffffffffff
[ 0.073336] ... max period: 00007fffffffffff
[ 0.076668] ... fixed-purpose events: 0
[ 0.080001] ... event mask: 000000000000000f
[ 0.083337] Checking 'hlt' instruction... OK.
[ 0.102959] ACPI: Core revision 20091214
[ 0.112051] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.113337] ftrace: allocating 21794 entries in 43 pages
[ 0.120063] Enabling APIC mode: Flat. Using 3 I/O APICs
[ 0.124121] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.160590] CPU0: Six-Core AMD Opteron(tm) Processor 2435 stepping 00
[ 0.180037] Booting Node 0, Processors #1
[ 0.009999] Initializing CPU#1
[ 0.290052] #2
[ 0.009999] Initializing CPU#2
[ 0.400063] #3
[ 0.009999] Initializing CPU#3
[ 0.506738] #4
[ 0.009999] Initializing CPU#4
[ 0.613398] #5
[ 0.009999] Initializing CPU#5
[ 0.723407] #6
[ 0.009999] Initializing CPU#6
[ 0.830073] #7 Ok.
[ 0.009999] Initializing CPU#7
[ 0.926712] Brought up 8 CPUs
[ 0.930002] Total of 8 processors activated (41619.34 BogoMIPS).
[ 0.933462] devtmpfs: initialized
[ 0.937433] regulator: core version 0.5
[ 0.940098] NET: Registered protocol family 16
[ 0.943377] EISA bus registered
[ 0.944547] ACPI: bus type pci registered
[ 0.946702] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[ 0.950003] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
[ 0.952530] PCI: Using MMCONFIG for extended config space
[ 0.953334] PCI: Using configuration type 1 for base access
[ 0.963376] bio: create slab <bio-0> at 0
[ 0.966686] ACPI: EC: Look up EC in DSDT
[ 0.970150] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20091214/dsopcode-596)
[ 0.973335] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node f70102b8), AE_AML_BUFFER_LIMIT
[ 0.979089] ACPI: Interpreter enabled
[ 0.980004] ACPI: (supports S0 S4 S5)
[ 0.981320] ACPI: Using IOAPIC for interrupt routing
[ 0.997011] ACPI: No dock devices found.
[ 0.998443] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.000102] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 1.003348] pci_root PNP0A03:00: host bridge window [mem 0xe8000000-0xf7ffffff] (ignored)
[ 1.006668] pci_root PNP0A03:00: host bridge window [io 0x1000-0x4fff] (ignored)
[ 1.009160] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 1.010001] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 1.013334] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
[ 1.016668] pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfed03fff] (ignored)
[ 1.019502] pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfed44fff] (ignored)
[ 1.020001] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
[ 1.023334] pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
[ 1.026668] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 1.030069] pci 0000:00:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 1.032342] pci 0000:00:03.0: reg 14: [io 0x1000-0x10ff]
[ 1.033339] pci 0000:00:03.0: reg 18: [mem 0xf3ef0000-0xf3efffff]
[ 1.036686] pci 0000:00:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.039133] pci 0000:00:03.0: supports D1 D2
[ 1.040065] pci 0000:00:04.0: reg 10: [io 0x2800-0x28ff]
[ 1.041886] pci 0000:00:04.0: reg 14: [mem 0xf3ee0000-0xf3ee01ff]
[ 1.043374] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 1.046670] pci 0000:00:04.0: PME# disabled
[ 1.048161] pci 0000:00:04.2: reg 10: [io 0x1400-0x14ff]
[ 1.050006] pci 0000:00:04.2: reg 14: [mem 0xf3ed0000-0xf3ed07ff]
[ 1.052034] pci 0000:00:04.2: reg 18: [mem 0xf3ec0000-0xf3ec3fff]
[ 1.053339] pci 0000:00:04.2: reg 1c: [mem 0xf3e00000-0xf3e7ffff]
[ 1.056684] pci 0000:00:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.058945] pci 0000:00:04.2: PME# supported from D0 D3hot D3cold
[ 1.060003] pci 0000:00:04.2: PME# disabled
[ 1.061478] pci 0000:00:04.4: reg 20: [io 0x1800-0x181f]
[ 1.063363] pci 0000:00:04.4: PME# supported from D0 D3hot D3cold
[ 1.066670] pci 0000:00:04.4: PME# disabled
[ 1.070065] pci 0000:00:04.6: reg 10: [mem 0xf3df0000-0xf3df00ff]
[ 1.072206] pci 0000:00:04.6: PME# supported from D0 D3hot D3cold
[ 1.073336] pci 0000:00:04.6: PME# disabled
[ 1.074796] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.076922] pci 0000:00:07.0: reg 10: [mem 0xf3de0000-0xf3de0fff]
[ 1.080006] pci 0000:00:07.0: reg 14: [io 0x1c00-0x1cff]
[ 1.081943] pci 0000:00:07.1: reg 10: [mem 0xf3dd0000-0xf3dd0fff]
[ 1.083339] pci 0000:00:07.1: reg 14: [io 0x3000-0x30ff]
[ 1.085327] pci 0000:00:07.2: reg 10: [mem 0xf3dc0000-0xf3dc0fff]
[ 1.086672] pci 0000:00:07.2: reg 14: [io 0x3400-0x34ff]
[ 1.090038] pci 0000:00:07.2: supports D1 D2
[ 1.091484] pci 0000:00:07.2: PME# supported from D0 D1 D2 D3hot
[ 1.093336] pci 0000:00:07.2: PME# disabled
[ 1.094860] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 1.096668] pci 0000:00:0f.0: PME# disabled
[ 1.098171] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 1.100001] pci 0000:00:10.0: PME# disabled
[ 1.101509] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 1.103335] pci 0000:00:11.0: PME# disabled
[ 1.106735] pci 0000:00:12.0: PME# supported from D0 D3hot D3cold
[ 1.110002] pci 0000:00:12.0: PME# disabled
[ 1.111513] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 1.113335] pci 0000:00:13.0: PME# disabled
[ 1.115357] pci 0000:01:0e.0: reg 10: [io 0x4000-0x4007]
[ 1.116671] pci 0000:01:0e.0: reg 14: [io 0x4008-0x400b]
[ 1.120004] pci 0000:01:0e.0: reg 18: [io 0x4010-0x4017]
[ 1.121849] pci 0000:01:0e.0: reg 1c: [io 0x4018-0x401b]
[ 1.123338] pci 0000:01:0e.0: reg 20: [io 0x4020-0x402f]
[ 1.125355] pci 0000:01:0e.0: reg 24: [mem 0xf3ff0000-0xf3ff1fff]
[ 1.126670] pci 0000:01:0e.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.130034] pci 0000:00:05.0: PCI bridge to [bus 01-02]
[ 1.131847] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
[ 1.133335] pci 0000:00:05.0: bridge window [mem 0xf3f00000-0xf3ffffff]
[ 1.136676] pci 0000:01:0d.0: PCI bridge to [bus 02-02]
[ 1.138481] pci 0000:00:0f.0: PCI bridge to [bus 04-06]
[ 1.140020] pci 0000:00:10.0: PCI bridge to [bus 07-09]
[ 1.142019] pci 0000:00:11.0: PCI bridge to [bus 0a-0c]
[ 1.143401] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf7ffffff 64bit]
[ 1.145679] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.146694] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.150002] pci 0000:03:00.0: PME# disabled
[ 1.151503] pci 0000:03:00.1: reg 10: [mem 0xf4000000-0xf5ffffff 64bit]
[ 1.153352] pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.156699] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[ 1.158805] pci 0000:03:00.1: PME# disabled
[ 1.160032] pci 0000:00:12.0: PCI bridge to [bus 03-03]
[ 1.161858] pci 0000:00:12.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 1.163352] pci 0000:00:13.0: PCI bridge to [bus 0d-0d]
[ 1.165105] pci_bus 0000:00: on NUMA node 0
[ 1.166669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.170098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT]
[ 1.172310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT]
[ 1.173402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT]
[ 1.176736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT]
[ 1.178917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT]
[ 1.180046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPXB._PRT]
[ 1.186757] ACPI: PCI Root Bridge [PCI1] (0000:40)
[ 1.190081] pci_root PNP0A03:01: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 1.193341] pci_root PNP0A03:01: host bridge window [mem 0xf8000000-0xfdffffff] (ignored)
[ 1.196668] pci_root PNP0A03:01: host bridge window [io 0x5000-0xffff] (ignored)
[ 1.200070] pci 0000:40:0f.0: PME# supported from D0 D3hot D3cold
[ 1.202117] pci 0000:40:0f.0: PME# disabled
[ 1.203402] pci 0000:40:10.0: PME# supported from D0 D3hot D3cold
[ 1.205538] pci 0000:40:10.0: PME# disabled
[ 1.206735] pci 0000:40:11.0: PME# supported from D0 D3hot D3cold
[ 1.210001] pci 0000:40:11.0: PME# disabled
[ 1.211607] pci 0000:40:12.0: PME# supported from D0 D3hot D3cold
[ 1.213335] pci 0000:40:12.0: PME# disabled
[ 1.214826] pci 0000:40:13.0: PME# supported from D0 D3hot D3cold
[ 1.216668] pci 0000:40:13.0: PME# disabled
[ 1.220033] pci 0000:40:0f.0: PCI bridge to [bus 42-44]
[ 1.221874] pci 0000:40:10.0: PCI bridge to [bus 45-47]
[ 1.223406] pci 0000:48:00.0: reg 10: [mem 0xfdc00000-0xfdffffff 64bit]
[ 1.225733] pci 0000:48:00.0: reg 18: [mem 0xfdbf0000-0xfdbf0fff 64bit]
[ 1.226672] pci 0000:48:00.0: reg 20: [io 0x5000-0x50ff]
[ 1.230009] pci 0000:48:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 1.232239] pci 0000:48:00.0: supports D1
[ 1.233334] pci 0000:48:00.0: PME# supported from D0
[ 1.234989] pci 0000:48:00.0: PME# disabled
[ 1.236694] pci 0000:40:11.0: PCI bridge to [bus 48-4a]
[ 1.238543] pci 0000:40:11.0: bridge window [io 0x5000-0x5fff]
[ 1.240002] pci 0000:40:11.0: bridge window [mem 0xfdb00000-0xfdffffff]
[ 1.243405] pci 0000:41:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
[ 1.245903] pci 0000:41:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.246695] pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
[ 1.250002] pci 0000:41:00.0: PME# disabled
[ 1.251514] pci 0000:41:00.1: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
[ 1.253352] pci 0000:41:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.255631] pci 0000:41:00.1: PME# supported from D0 D3hot D3cold
[ 1.256669] pci 0000:41:00.1: PME# disabled
[ 1.260028] pci 0000:40:12.0: PCI bridge to [bus 41-41]
[ 1.261835] pci 0000:40:12.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 1.263352] pci 0000:40:13.0: PCI bridge to [bus 4b-4b]
[ 1.265177] pci_bus 0000:40: on NUMA node 0
[ 1.266668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 1.268782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB0._PRT]
[ 1.270043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB1._PRT]
[ 1.273376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB2._PRT]
[ 1.275597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB3._PRT]
[ 1.276709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB4._PRT]
[ 1.280091] ACPI: PCI Interrupt Link [IUSB] (IRQs *5)
[ 1.283605] ACPI: PCI Interrupt Link [ISF0] (IRQs *14)
[ 1.285701] ACPI: PCI Interrupt Link [IN00] (IRQs 7 10 11) *0, disabled.
[ 1.287533] ACPI: PCI Interrupt Link [IN01] (IRQs 7 10 11) *0, disabled.
[ 1.290874] ACPI: PCI Interrupt Link [IN02] (IRQs 7 10 11) *0, disabled.
[ 1.296795] ACPI: PCI Interrupt Link [IN03] (IRQs 7 10 11) *0, disabled.
[ 1.300831] ACPI: PCI Interrupt Link [IN04] (IRQs 7 10 11) *0, disabled.
[ 1.304193] ACPI: PCI Interrupt Link [IN05] (IRQs 7 10 11) *0, disabled.
[ 1.307485] ACPI: PCI Interrupt Link [IN06] (IRQs 7 10 11) *0, disabled.
[ 1.310191] ACPI: PCI Interrupt Link [IN07] (IRQs 7 10 11) *0, disabled.
[ 1.312646] ACPI: PCI Interrupt Link [IN08] (IRQs 7 10 11) *0, disabled.
[ 1.314318] ACPI: PCI Interrupt Link [IN09] (IRQs 7 10 11) *0, disabled.
[ 1.317481] ACPI: PCI Interrupt Link [IN10] (IRQs 7 10 11) *0, disabled.
[ 1.320103] ACPI: PCI Interrupt Link [IN11] (IRQs 7 10 11) *0, disabled.
[ 1.323029] ACPI: PCI Interrupt Link [IN12] (IRQs 7 10 11) *0, disabled.
[ 1.324157] ACPI: PCI Interrupt Link [IN13] (IRQs 7 10 11) *0, disabled.
[ 1.327543] ACPI: PCI Interrupt Link [IN14] (IRQs 7 10 11) *0, disabled.
[ 1.330825] ACPI: PCI Interrupt Link [IN15] (IRQs 7 10 11) *0, disabled.
[ 1.333980] ACPI: PCI Interrupt Link [IN16] (IRQs 7 10 *11)
[ 1.336019] ACPI: PCI Interrupt Link [IN17] (IRQs 7 10 *11)
[ 1.337111] ACPI: PCI Interrupt Link [IN18] (IRQs 7 10 *11)
[ 1.340449] ACPI: PCI Interrupt Link [IN19] (IRQs 7 10 *11)
[ 1.343637] ACPI: PCI Interrupt Link [IN20] (IRQs 7 10 *11)
[ 1.345637] ACPI: PCI Interrupt Link [IN21] (IRQs 7 10 11) *0, disabled.
[ 1.347534] ACPI: PCI Interrupt Link [IN22] (IRQs 7 *10 11)
[ 1.350281] ACPI: PCI Interrupt Link [IN23] (IRQs *7 10 11)
[ 1.352338] ACPI: PCI Interrupt Link [IN24] (IRQs 7 10 *11)
[ 1.353776] ACPI: PCI Interrupt Link [IN25] (IRQs 7 10 *11)
[ 1.355810] ACPI: PCI Interrupt Link [IN26] (IRQs 7 10 *11)
[ 1.357111] ACPI: PCI Interrupt Link [IN27] (IRQs 7 10 11) *0, disabled.
[ 1.360875] ACPI: PCI Interrupt Link [IN28] (IRQs *7 10 11)
[ 1.362849] ACPI: PCI Interrupt Link [IN29] (IRQs 7 10 *11)
[ 1.363836] ACPI: PCI Interrupt Link [IN30] (IRQs 7 *10 11)
[ 1.366959] ACPI: PCI Interrupt Link [IN31] (IRQs 7 10 11) *0, disabled.
[ 1.369394] vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.370016] vgaarb: loaded
[ 1.373414] SCSI subsystem initialized
[ 1.374691] libata version 3.00 loaded.
[ 1.376749] PCI: Using ACPI for IRQ routing
[ 1.378226] PCI: pci_cache_line_size set to 64 bytes
[ 1.380106] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.383340] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.385182] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.413377] Switching to clocksource tsc
[ 1.435461] pnp: PnP ACPI init
[ 1.436628] ACPI: bus type pnp registered
[ 1.446776] pnp: PnP ACPI: found 12 devices
[ 1.449040] ACPI: ACPI bus type pnp unregistered
[ 1.450599] PnPBIOS: Disabled by ACPI PNP
[ 1.452108] system 00:01: [io 0x0408-0x040f] has been reserved
[ 1.454126] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.456164] system 00:01: [io 0x04d6] has been reserved
[ 1.457946] system 00:01: [io 0x0310-0x0311] has been reserved
[ 1.460010] system 00:01: [io 0x0900-0x09fe] has been reserved
[ 1.462061] system 00:01: [io 0x0c80-0x0c83] has been reserved
[ 1.464095] system 00:01: [io 0x0cd4-0x0cd7] has been reserved
[ 1.466134] system 00:01: [io 0x0f50-0x0f58] has been reserved
[ 1.468201] system 00:01: [io 0x0520] has been reserved
[ 1.470226] system 00:01: [io 0x0580-0x059f] has been reserved
[ 1.472258] system 00:01: [io 0x0700-0x0703] has been reserved
[ 1.474245] system 00:01: [io 0x0c06-0x0c07] has been reserved
[ 1.476279] system 00:01: [io 0x0c14] has been reserved
[ 1.478121] system 00:01: [io 0x0c4a] has been reserved
[ 1.479947] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 1.481980] system 00:01: [io 0x0c6c] has been reserved
[ 1.483809] system 00:01: [io 0x0c6f] has been reserved
[ 1.485578] system 00:01: [io 0x0ca0-0x0ca1] has been reserved
[ 1.487776] system 00:01: [io 0x0ca4-0x0ca5] has been reserved
[ 1.489756] system 00:01: [io 0x03f8-0x03ff] has been reserved
[ 1.491824] system 00:01: [mem 0xd0000000-0xdfffffff] has been reserved
[ 1.530063] pci 0000:00:05.0: BAR 15: assigned [mem 0xe0000000-0xe00fffff pref]
[ 1.533108] pci 0000:00:12.0: BAR 15: assigned [mem 0xe0100000-0xe01fffff pref]
[ 1.536081] pci 0000:00:03.0: BAR 6: assigned [mem 0xe0200000-0xe021ffff pref]
[ 1.538754] pci 0000:00:04.2: BAR 6: assigned [mem 0xe0220000-0xe022ffff pref]
[ 1.541246] pci 0000:01:0e.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
[ 1.543769] pci 0000:01:0d.0: PCI bridge to [bus 02-02]
[ 1.545564] pci 0000:01:0d.0: bridge window [io disabled]
[ 1.547465] pci 0000:01:0d.0: bridge window [mem disabled]
[ 1.549358] pci 0000:01:0d.0: bridge window [mem pref disabled]
[ 1.551446] pci 0000:00:05.0: PCI bridge to [bus 01-02]
[ 1.553205] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
[ 1.555246] pci 0000:00:05.0: bridge window [mem 0xf3f00000-0xf3ffffff]
[ 1.557777] pci 0000:00:05.0: bridge window [mem 0xe0000000-0xe00fffff pref]
[ 1.560248] pci 0000:00:0f.0: PCI bridge to [bus 04-06]
[ 1.562062] pci 0000:00:0f.0: bridge window [io disabled]
[ 1.564043] pci 0000:00:0f.0: bridge window [mem disabled]
[ 1.566024] pci 0000:00:0f.0: bridge window [mem pref disabled]
[ 1.568116] pci 0000:00:10.0: PCI bridge to [bus 07-09]
[ 1.569862] pci 0000:00:10.0: bridge window [io disabled]
[ 1.571761] pci 0000:00:10.0: bridge window [mem disabled]
[ 1.573868] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 1.575932] pci 0000:00:11.0: PCI bridge to [bus 0a-0c]
[ 1.577735] pci 0000:00:11.0: bridge window [io disabled]
[ 1.579632] pci 0000:00:11.0: bridge window [mem disabled]
[ 1.581521] pci 0000:00:11.0: bridge window [mem pref disabled]
[ 1.583603] pci 0000:03:00.0: BAR 6: assigned [mem 0xe0100000-0xe010ffff pref]
[ 1.586045] pci 0000:03:00.1: BAR 6: assigned [mem 0xe0110000-0xe011ffff pref]
[ 1.588502] pci 0000:00:12.0: PCI bridge to [bus 03-03]
[ 1.590465] pci 0000:00:12.0: bridge window [io disabled]
[ 1.592406] pci 0000:00:12.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 1.594768] pci 0000:00:12.0: bridge window [mem 0xe0100000-0xe01fffff pref]
[ 1.597276] pci 0000:00:13.0: PCI bridge to [bus 0d-0d]
[ 1.599108] pci 0000:00:13.0: bridge window [io disabled]
[ 1.601010] pci 0000:00:13.0: bridge window [mem disabled]
[ 1.602907] pci 0000:00:13.0: bridge window [mem pref disabled]
[ 1.605025] alloc irq_desc for 42 on node -1
[ 1.606515] alloc kstat_irqs on node -1
[ 1.608069] pci 0000:00:0f.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42
[ 1.610381] pci 0000:00:0f.0: setting latency timer to 64
[ 1.612194] alloc irq_desc for 38 on node -1
[ 1.613667] alloc kstat_irqs on node -1
[ 1.615067] pci 0000:00:10.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
[ 1.617315] pci 0000:00:10.0: setting latency timer to 64
[ 1.619121] alloc irq_desc for 39 on node -1
[ 1.620641] alloc kstat_irqs on node -1
[ 1.622070] pci 0000:00:11.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39
[ 1.624364] pci 0000:00:11.0: setting latency timer to 64
[ 1.626368] alloc irq_desc for 40 on node -1
[ 1.627690] alloc kstat_irqs on node -1
[ 1.629316] pci 0000:00:12.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 1.631664] pci 0000:00:12.0: setting latency timer to 64
[ 1.633471] alloc irq_desc for 41 on node -1
[ 1.634956] alloc kstat_irqs on node -1
[ 1.636305] pci 0000:00:13.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41
[ 1.638609] pci 0000:00:13.0: setting latency timer to 64
[ 1.640455] pci 0000:40:11.0: BAR 15: assigned [mem 0xe0300000-0xe03fffff pref]
[ 1.643105] pci 0000:40:12.0: BAR 15: assigned [mem 0xe0400000-0xe04fffff pref]
[ 1.645543] pci 0000:40:0f.0: PCI bridge to [bus 42-44]
[ 1.647363] pci 0000:40:0f.0: bridge window [io disabled]
[ 1.649250] pci 0000:40:0f.0: bridge window [mem disabled]
[ 1.651142] pci 0000:40:0f.0: bridge window [mem pref disabled]
[ 1.653231] pci 0000:40:10.0: PCI bridge to [bus 45-47]
[ 1.655080] pci 0000:40:10.0: bridge window [io disabled]
[ 1.657735] pci 0000:40:10.0: bridge window [mem disabled]
[ 1.659866] pci 0000:40:10.0: bridge window [mem pref disabled]
[ 1.661990] pci 0000:48:00.0: BAR 6: assigned [mem 0xe0300000-0xe037ffff pref]
[ 1.664435] pci 0000:40:11.0: PCI bridge to [bus 48-4a]
[ 1.666223] pci 0000:40:11.0: bridge window [io 0x5000-0x5fff]
[ 1.668259] pci 0000:40:11.0: bridge window [mem 0xfdb00000-0xfdffffff]
[ 1.670572] pci 0000:40:11.0: bridge window [mem 0xe0300000-0xe03fffff pref]
[ 1.673070] pci 0000:41:00.0: BAR 6: assigned [mem 0xe0400000-0xe040ffff pref]
[ 1.675483] pci 0000:41:00.1: BAR 6: assigned [mem 0xe0410000-0xe041ffff pref]
[ 1.678043] pci 0000:40:12.0: PCI bridge to [bus 41-41]
[ 1.679837] pci 0000:40:12.0: bridge window [io disabled]
[ 1.681732] pci 0000:40:12.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 1.684034] pci 0000:40:12.0: bridge window [mem 0xe0400000-0xe04fffff pref]
[ 1.686504] pci 0000:40:13.0: PCI bridge to [bus 4b-4b]
[ 1.688314] pci 0000:40:13.0: bridge window [io disabled]
[ 1.690250] pci 0000:40:13.0: bridge window [mem disabled]
[ 1.692212] pci 0000:40:13.0: bridge window [mem pref disabled]
[ 1.694472] alloc irq_desc for 36 on node -1
[ 1.696011] alloc kstat_irqs on node -1
[ 1.697360] pci 0000:40:0f.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 1.699632] pci 0000:40:0f.0: setting latency timer to 64
[ 1.701485] alloc irq_desc for 32 on node -1
[ 1.702962] alloc kstat_irqs on node -1
[ 1.704344] pci 0000:40:10.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.706625] pci 0000:40:10.0: setting latency timer to 64
[ 1.708429] alloc irq_desc for 33 on node -1
[ 1.709903] alloc kstat_irqs on node -1
[ 1.711427] pci 0000:40:11.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 1.713667] pci 0000:40:11.0: setting latency timer to 64
[ 1.715457] alloc irq_desc for 34 on node -1
[ 1.716993] alloc kstat_irqs on node -1
[ 1.718403] pci 0000:40:12.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[ 1.720743] pci 0000:40:12.0: setting latency timer to 64
[ 1.722536] alloc irq_desc for 35 on node -1
[ 1.724052] alloc kstat_irqs on node -1
[ 1.725437] pci 0000:40:13.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
[ 1.727770] pci 0000:40:13.0: setting latency timer to 64
[ 1.729704] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 1.731559] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 1.733725] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.735568] pci_bus 0000:01: resource 1 [mem 0xf3f00000-0xf3ffffff]
[ 1.737765] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff pref]
[ 1.739990] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 1.742085] pci_bus 0000:03: resource 2 [mem 0xe0100000-0xe01fffff pref]
[ 1.744364] pci_bus 0000:40: resource 0 [io 0x0000-0xffff]
[ 1.746396] pci_bus 0000:40: resource 1 [mem 0x00000000-0xffffffff]
[ 1.748549] pci_bus 0000:48: resource 0 [io 0x5000-0x5fff]
[ 1.750473] pci_bus 0000:48: resource 1 [mem 0xfdb00000-0xfdffffff]
[ 1.752663] pci_bus 0000:48: resource 2 [mem 0xe0300000-0xe03fffff pref]
[ 1.754910] pci_bus 0000:41: resource 1 [mem 0xf8000000-0xfbffffff]
[ 1.757083] pci_bus 0000:41: resource 2 [mem 0xe0400000-0xe04fffff pref]
[ 1.759421] NET: Registered protocol family 2
[ 1.760968] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.764280] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.767346] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.769911] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.772153] TCP reno registered
[ 1.773191] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.775266] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.777477] NET: Registered protocol family 1
[ 1.778970] pci 0000:00:03.0: Boot video device
[ 1.780700] pci 0000:00:04.4: HCRESET not completed yet!
[ 1.784392] pci 0000:00:06.0: disabled boot interrupts on device [1166:0205]
[ 1.813424] PCI: CLS 64 bytes, default 64
[ 1.815013] Trying to unpack rootfs image as initramfs...
[ 2.044270] Freeing initrd memory: 9492k freed
[ 2.055341] Scanning for low memory corruption every 60 seconds
[ 2.058355] highmem bounce pool size: 64 pages
[ 2.059879] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.067207] VFS: Disk quotas dquot_6.5.2
[ 2.069163] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.073230] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2.080354] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2.087649] SGI XFS Quota Management subsystem
[ 2.090766] aufs 2-33-rcN
[ 2.093380] msgmni has been set to 1705
[ 2.096204] alg: No test for lzma (lzma-generic)
[ 2.097985] alg: No test for stdrng (krng)
[ 2.099653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 2.105973] io scheduler noop registered
[ 2.107273] io scheduler deadline registered
[ 2.109051] io scheduler cfq registered (default)
[ 2.110990] pcieport 0000:00:0f.0: setting latency timer to 64
[ 2.113065] alloc irq_desc for 48 on node -1
[ 2.114290] alloc kstat_irqs on node -1
[ 2.115917] pcieport 0000:00:0f.0: irq 48 for MSI/MSI-X
[ 2.117990] pcieport 0000:00:10.0: setting latency timer to 64
[ 2.120069] alloc irq_desc for 49 on node -1
[ 2.121297] alloc kstat_irqs on node -1
[ 2.122948] pcieport 0000:00:10.0: irq 49 for MSI/MSI-X
[ 2.124927] pcieport 0000:00:11.0: setting latency timer to 64
[ 2.127020] alloc irq_desc for 50 on node -1
[ 2.128511] alloc kstat_irqs on node -1
[ 2.129904] pcieport 0000:00:11.0: irq 50 for MSI/MSI-X
[ 2.131896] pcieport 0000:00:12.0: setting latency timer to 64
[ 2.134001] alloc irq_desc for 51 on node -1
[ 2.135555] alloc kstat_irqs on node -1
[ 2.136957] pcieport 0000:00:12.0: irq 51 for MSI/MSI-X
[ 2.138942] pcieport 0000:00:13.0: setting latency timer to 64
[ 2.141073] alloc irq_desc for 52 on node -1
[ 2.142562] alloc kstat_irqs on node -1
[ 2.143970] pcieport 0000:00:13.0: irq 52 for MSI/MSI-X
[ 2.145997] pcieport 0000:40:0f.0: setting latency timer to 64
[ 2.148035] alloc irq_desc for 53 on node -1
[ 2.149574] alloc kstat_irqs on node -1
[ 2.150973] pcieport 0000:40:0f.0: irq 53 for MSI/MSI-X
[ 2.153043] pcieport 0000:40:10.0: setting latency timer to 64
[ 2.155176] alloc irq_desc for 54 on node -1
[ 2.156674] alloc kstat_irqs on node -1
[ 2.158068] pcieport 0000:40:10.0: irq 54 for MSI/MSI-X
[ 2.160105] pcieport 0000:40:11.0: setting latency timer to 64
[ 2.162180] alloc irq_desc for 55 on node -1
[ 2.163681] alloc kstat_irqs on node -1
[ 2.165065] pcieport 0000:40:11.0: irq 55 for MSI/MSI-X
[ 2.167155] pcieport 0000:40:12.0: setting latency timer to 64
[ 2.169224] alloc irq_desc for 56 on node -1
[ 2.170462] alloc kstat_irqs on node -1
[ 2.172116] pcieport 0000:40:12.0: irq 56 for MSI/MSI-X
[ 2.174161] pcieport 0000:40:13.0: setting latency timer to 64
[ 2.176227] alloc irq_desc for 57 on node -1
[ 2.177469] alloc kstat_irqs on node -1
[ 2.179113] pcieport 0000:40:13.0: irq 57 for MSI/MSI-X
[ 2.181234] aer 0000:00:0f.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.184041] aer 0000:00:10.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.186723] aer 0000:00:11.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.189370] aer 0000:00:12.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.192158] aer 0000:00:13.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.194860] aer 0000:40:0f.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.199543] aer 0000:40:10.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.202248] aer 0000:40:11.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.204983] aer 0000:40:12.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.207687] aer 0000:40:13.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.210778] pci-stub: invalid id string ""
[ 2.212807] isapnp: Scanning for PnP cards...
[ 2.571808] isapnp: No Plug & Play device found
[ 2.582820] Linux agpgart interface v0.103
[ 2.585003] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
[ 2.587303] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.589695] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.592775] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.601207] brd: module loaded
[ 2.602583] Compaq SMART2 Driver (v 2.6.0)
[ 2.604230] HP CISS Driver (v 3.6.20)
[ 2.605805] cciss 0000:48:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 2.608249] alloc irq_desc for 58 on node -1
[ 2.610063] alloc kstat_irqs on node -1
[ 2.611406] cciss 0000:48:00.0: irq 58 for MSI/MSI-X
[ 2.613143] alloc irq_desc for 59 on node -1
[ 2.614711] alloc kstat_irqs on node -1
[ 2.616061] cciss 0000:48:00.0: irq 59 for MSI/MSI-X
[ 2.617717] alloc irq_desc for 60 on node -1
[ 2.619185] alloc kstat_irqs on node -1
[ 2.620576] cciss 0000:48:00.0: irq 60 for MSI/MSI-X
[ 2.622310] alloc irq_desc for 61 on node -1
[ 2.623840] alloc kstat_irqs on node -1
[ 2.625231] cciss 0000:48:00.0: irq 61 for MSI/MSI-X
[ 2.630412] IRQ 60/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 2.633883] cciss0: <0x323a> at PCI 0000:48:00.0 IRQ 60 using DAC
[ 2.639291] cciss/c0d0: p1 p2 < p5 >
[ 2.642512] sata_svw 0000:01:0e.0: version 2.3
[ 2.644424] ACPI: PCI Interrupt Link [ISF0] enabled at IRQ 14
[ 2.646474] sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14 (level, low) -> IRQ 14
[ 2.649514] scsi0 : sata_svw
[ 2.650849] scsi1 : sata_svw
[ 2.652224] scsi2 : sata_svw
[ 2.653581] scsi3 : sata_svw
[ 2.656706] ata1: SATA max UDMA/133 mmio m8192 at 0xf3ff0000 port 0xf3ff0000 irq 14
[ 2.659796] ata2: SATA max UDMA/133 mmio m8192 at 0xf3ff0000 port 0xf3ff0100 irq 14
[ 2.662351] ata3: SATA max UDMA/133 mmio m8192 at 0xf3ff0000 port 0xf3ff0200 irq 14
[ 2.664943] ata4: SATA max UDMA/133 mmio m8192 at 0xf3ff0000 port 0xf3ff0300 irq
14
[ 2.672533] Fixed MDIO Bus: probed
[ 2.677871] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 2.682255] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.684019] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.686125] mice: PS/2 mouse device common for all mice
[ 2.688262] md: linear personality registered for level -1
[ 2.691382] md: raid0 personality registered for level 0
[ 2.693194] md: raid1 personality registered for level 1
[ 2.695057] md: raid10 personality registered for level 10
[ 2.696974] md: multipath personality registered for level -4
[ 2.699258] device-mapper: uevent: version 1.0.3
[ 2.701279] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel at redhat.com
[ 2.707769] EISA: Probing bus 0 at eisa.0
[ 2.709232] EISA: Cannot allocate resource for mainboard
[ 2.711095] Cannot allocate resource for EISA slot 1
[ 2.712800] Cannot allocate resource for EISA slot 2
[ 2.714461] Cannot allocate resource for EISA slot 3
[ 2.716156] Cannot allocate resource for EISA slot 4
[ 2.717903] Cannot allocate resource for EISA slot 5
[ 2.719604] EISA: Detected 0 cards.
[ 2.720818] cpuidle: using governor ladder
[ 2.722183] cpuidle: using governor menu
[ 2.723979] TCP cubic registered
[ 2.725203] NET: Registered protocol family 15
[ 2.726931] Using IPI No-Shortcut mode
[ 2.728576] registered taskstats version 1
[ 2.730159] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.730511] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 2.730540] Initalizing network drop monitor service
[ 2.867368] psmouse serio1: ID: 10 00 64
[ 2.924816] logips2pp: Detected unknown logitech mouse model 2
[ 2.986747] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.010288] ata1.00: ATAPI: Optiarc DVD RW AD-7561S, AH52, max UDMA/100
[ 3.040325] ata1.00: configured for UDMA/100
[ 3.044696] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH52 PQ: 0 ANSI: 5
[ 3.053955] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.056528] Uniform CD-ROM driver Revision: 3.20
[ 3.058495] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.225000] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[ 3.390921] ata2: SATA link down (SStatus 4 SControl 300)
[ 3.720926] ata3: SATA link down (SStatus 4 SControl 300)
[ 4.050925] ata4: SATA link down (SStatus 4 SControl 300)
[ 4.063481] Freeing unused kernel memory: 620k freed
[ 4.065900] Write protecting the kernel text: 4188k
[ 4.067721] Write protecting the kernel read-only data: 1868k
Loading, please wait...
+ [ -z ]
+ export resume=
+ depmod -a
+ maybe_break top
+ [ = top ]
+ run_scripts /scripts/init-top
+ initdir=/scripts/init-top
+ [ ! -d /scripts/init-top ]
+ get_prereqs
+ set_initlist
+ unset initlist
+ [ /scripts/init-top/all_generic_ide = /scripts/init-top/* ]
+ [ ! -x /scripts/init-top/all_generic_ide ]
+ [ -d /scripts/init-top/all_generic_ide ]
+ initlist= all_generic_ide
+ [ /scripts/init-top/grml = /scripts/init-top/* ]
+ [ ! -x /scripts/init-top/grml ]
+ [ -d /scripts/init-top/grml ]
+ initlist= all_generic_ide grml
+ [ /scripts/init-top/keymap = /scripts/init-top/* ]
+ [ ! -x /scripts/init-top/keymap ]
+ [ -d /scripts/init-top/keymap ]
+ initlist= all_gener[ 4.243595] squashfs: version 4.0 (2009/01/31) Phillip Lougher
ic_ide grml keymap
+ /scripts/init-top/all_generic_ide prereqs
+ tmp=
+ eval array_all_generic_ide=""
+ array_all_generic_ide=
+ /scripts/init-top/grml prereqs
+ tmp=
+ eval array_grml=""
+ array_grml=
+ /scripts/init-top/keymap prereqs
+ tmp=
+ eval array_keymap=""
+ array_keymap=
+ reduce_prereqs
+ unset runlist
+ set -- all_generic_ide grml keymap
+ i=3
+ [ 3 -ne 0 ]
+ oldi=3
+ reduce_satisfied all_generic_ide
+ render array_all_generic_ide
+ eval echo -n ${array_all_generic_ide}
+ echo -n
+ deplist=
+ unset tmpdeplist
+ deplist=
+ eval array_all_generic_ide=""
+ array_all_generic_ide=
+ render array_all_generic_ide
+ eval echo -n ${array_all_generic_ide}
+ echo -n
+ count_unsatisfied
+ set --
+ return 0
+ cnt=0
+ [ 0 -eq 0 ]
+ runlist= all_generic_ide
+ pop_list_item all_generic_ide all_generic_ide grml keymap
+ item=all_generic_ide
+ shift
+ set -- all_generic_ide grml keymap
+ unset tmppop
+ [ all_generic_ide = all_generic_ide ]
+ continue
+ [ grml = all_generic_ide ]
+ tmppop= grml
+ [ keymap = all_generic_ide ]
+ tmppop= grml keymap
+ initlist= grml keymap
+ i=2
+ reduce_satisfied grml
+ render array_grml
+ eval echo -n ${array_grml}
+ echo -n
+ deplist=
+ unset tmpdeplist
+ deplist=
+ pop_list_item all_generic_ide
+ item=all_generic_ide
+ shift
+ set --
+ unset tmppop
+ deplist=
+ eval array_grml=""
+ array_grml=
+ render array_grml
+ eval echo -n ${array_grml}
+ echo -n
+ count_unsatisfied
+ set --
+ return 0
+ cnt=0
+ [ 0 -eq 0 ]
+ runlist= all_generic_ide grml
+ pop_list_item grml grml keymap
+ item=grml
+ shift
+ set -- grml keymap
+ unset tmppop
+ [ grml = grml ]
+ continue
+ [ keymap = grml ]
+ tmppop= keymap
+ initlist= keymap
+ i=1
+ reduce_satisfied keymap
+ render array_keymap
+ eval echo -n ${array_keymap}
+ echo -n
+ deplist=
+ unset tmpdeplist
+ deplist=
+ pop_list_item all_generic_ide
+ item=all_generic_ide
+ shift
+ set --
+ unset tmppop
+ deplist=
+ pop_list_item grml
+ item=grml
+ shift
+ set --
+ unset tmppop
+ deplist=
+ eval array_keymap=""
+ array_keymap=
+ render array_keymap
+ eval echo -n ${array_keymap}
+ echo -n
+ count_unsatisfied
+ set --
+ return 0
+ cnt=0
+ [ 0 -eq 0 ]
+ runlist= all_generic_ide grml keymap
+ pop_list_item keymap keymap
+ item=keymap
+ shift
+ set -- keymap
+ unset tmppop
+ [ keymap = keymap ]
+ continue
+ initlist=
+ i=0
+ [ 0 -eq 3 ]
+ [ 0 -ne 0 ]
+ call_scripts
+ [ = y ]
+ /scripts/init-top/all_generic_ide
+ [ -e /conf/param.conf ]
+ [ = y ]
+ /scripts/init-top/grml
debug: scripts/init-top/grml running
Welcome to
____ ____ __ __ _
/ ___| _ \| \/ | |
| | _| |_) | |\/| | |
| |_| | _ <| | | | |___
\____|_| \_\_| |_|_____|
grml.org - Linux for sysadmins and texttool users.
* Running grml-med-sid 2010.03.11 Release Codename i-need-beer [2010-03-11]
* Finished early booting sequence. [ ok ]
* Searching for GRML file, this might take a few seconds...
+ [ -e /conf/param.conf ]
+ [ = y ]
+ /scripts/init-top/keymap
+ [ -e /conf/param.conf ]
+ maybe_break modules
+ [ = modules ]
+ log_begin_msg Loading essential drivers
+ [ -x /sbin/usplash_write ]
+ _log_msg Begin: Loading essential drivers ...
+ [ n = y ]
+ printf Begin: Loading essential drivers ...
Begin: Loading essential drivers ... + load_modules
+ [ -e /conf/modules ]
+ cat /conf/modules
+ read m
+ [ -z dm-mod ]
+ printf %.1s dm-mod
+ com=d
+ [ d = # ]
+ modprobe dm-mod
+ read m
+ [ -z dm-mirror ]
+ printf %.1s dm-mirror
+ com=d
+ [ d = # ]
+ modprobe dm-mirror
+ read m
+ [ -z dm-raid45 ]
+ printf %.1s dm-raid45
+ com=d
+ [ d = # ]
+ modprobe dm-raid45
+ read m
+ [ -z unix ]
+ printf %.1s unix
+ com=u
+ [ u = # ]
+ modprobe unix
+ read m
+ log_end_msg
+ [ -x /sbin/usplash_write ]
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ maybe_break premount
+ [ = premount ]
+ [ n != y ]
+ log_begin_msg Running /scripts/init-premount
+ [ -x /sbin/usplash_write ]
+ _log_msg Begin: Running /scripts/init-premount ...
+ [ n = y ]
+ printf Begin: Running /scripts/init-premount ...
Begin: Running /scripts/init-premount ... + run_scripts /scripts/init-premount
+ initdir=/scripts/init-premount
+ [ ! -d /scripts/init-premount ]
+ get_prereqs
+ set_initlist
+ unset initlist
+ [ /scripts/init-premount/blacklist = /scripts/init-premount/* ]
+ [ ! -x /scripts/init-premount/blacklist ]
+ [ -d /scripts/init-premount/blacklist ]
+ initlist= blacklist
+ [ /scripts/init-premount/select_eth_device = /scripts/init-premount/* ]
+ [ ! -x /scripts/init-premount/select_eth_device ]
+ [ -d /scripts/init-premount/select_eth_device ]
+ initlist= blacklist select_eth_device
+ [ /scripts/init-premount/udev = /scripts/init-premount/* ]
+ [ ! -x /scripts/init-premount/udev ]
+ [ -d /scripts/init-premount/udev ]
+ initlist= blacklist select_eth_device udev
+ /scripts/init-premount/blacklist prereqs
+ tmp=
+ eval array_blacklist=""
+ array_blacklist=
+ /scripts/init-premount/select_eth_device prereqs
+ tmp=blacklist udev
+ eval array_select_eth_device="blacklist udev"
+ array_select_eth_device=blacklist udev
+ /scripts/init-premount/udev prereqs
+ tmp=
+ eval array_udev=""
+ array_udev=
+ reduce_prereqs
+ unset runlist
+ set -- blacklist select_eth_device udev
+ i=3
+ [ 3 -ne 0 ]
+ oldi=3
+ reduce_satisfied blacklist
+ render array_blacklist
+ eval echo -n ${array_blacklist}
+ echo -n
+ deplist=
+ unset tmpdeplist
+ deplist=
+ eval array_blacklist=""
+ array_blacklist=
+ render array_blacklist
+ eval echo -n ${array_blacklist}
+ echo -n
+ count_unsatisfied
+ set --
+ return 0
+ cnt=0
+ [ 0 -eq 0 ]
+ runlist= blacklist
+ pop_list_item blacklist blacklist select_eth_device udev
+ item=blacklist
+ shift
+ set -- blacklist select_eth_device udev
+ unset tmppop
+ [ blacklist = blacklist ]
+ continue
+ [ select_eth_device = blacklist ]
+ tmppop= select_eth_device
+ [ udev = blacklist ]
+ tmppop= select_eth_device udev
+ initlist= select_eth_device udev
+ i=2
+ reduce_satisfied select_eth_device
+ render array_select_eth_device
+ eval echo -n ${array_select_eth_device}
+ echo -n blacklist udev
+ deplist=blacklist udev
+ unset tmpdeplist
+ [ ! -x /scripts/init-premount/blacklist ]
+ [ -d /scripts/init-premount/blacklist ]
+ tmpdeplist= blacklist
+ [ ! -x /scripts/init-premount/udev ]
+ [ -d /scripts/init-premount/udev ]
+ tmpdeplist= blacklist udev
+ deplist= blacklist udev
+ pop_list_item blacklist blacklist udev
+ item=blacklist
+ shift
+ set -- blacklist udev
+ unset tmppop
+ [ blacklist = blacklist ]
+ continue
+ [ udev = blacklist ]
+ tmppop= udev
+ deplist= udev
+ eval array_select_eth_device=" udev"
+ array_select_eth_device= udev
+ render array_select_eth_device
+ eval echo -n ${array_select_eth_device}
+ echo -n udev
+ count_unsatisfied udev
+ set -- udev
+ return 1
+ cnt=1
+ [ 1 -eq 0 ]
+ reduce_satisfied udev
+ render array_udev
+ eval echo -n ${array_udev}
+ echo -n
+ deplist=
+ unset tmpdeplist
+ deplist=
+ pop_list_item blacklist
+ item=blacklist
+ shift
+ set --
+ unset tmppop
+ deplist=
+ eval array_udev=""
+ array_udev=
+ render array_udev
+ eval echo -n ${array_udev}
+ echo -n
+ count_unsatisfied
+ set --
+ return 0
+ cnt=0
+ [ 0 -eq 0 ]
+ runlist= blacklist udev
+ pop_list_item udev select_eth_device udev
+ item=udev
+ shift
+ set -- select_eth_device udev
+ unset tmppop
+ [ select_eth_device = udev ]
+ tmppop= select_eth_device
+ [ udev = udev ]
+ continue
+ initlist= select_eth_device
+ i=1
+ [ 1 -eq 3 ]
+ [ 1 -ne 0 ]
+ oldi=1
+ reduce_satisfied select_eth_device
+ render array_select_eth_device
+ eval echo -n ${array_select_eth_device}
+ echo -n udev
+ deplist=udev
+ unset tmpdeplist
+ [ ! -x /scripts/init-premount/udev ]
+ [ -d /scripts/init-premount/udev ]
+ tmpdeplist= udev
+ deplist= udev
+ pop_list_item blacklist udev
+ item=blacklist
+ shift
+ set -- udev
+ unset tmppop
+ [ udev = blacklist ]
+ tmppop= udev
+ deplist= udev
+ pop_list_item udev udev
+ item=udev
+ shift
+ set -- udev
+ unset tmppop
+ [ udev = udev ]
+ continue
+ deplist=
+ eval array_select_eth_device=""
+ array_select_eth_device=
+ render array_select_eth_device
+ eval echo -n ${array_select_eth_device}
+ echo -n
+ count_unsatisfied
+ set --
+ return 0
+ cnt=0
+ [ 0 -eq 0 ]
+ runlist= blacklist udev select_eth_device
+ pop_list_item select_eth_device select_eth_device
+ item=select_eth_device
+ shift
+ set -- select_eth_device
+ unset tmppop
+ [ select_eth_device = select_eth_device ]
+ continue
+ initlist=
+ i=0
+ [ 0 -eq 1 ]
+ [ 0 -ne 0 ]
+ call_scripts
+ [ = y ]
+ /scripts/init-premount/blacklist
+ [ -e /conf/param.conf ]
+ [ = y ]
+ /scripts/init-premount/udev
[ 4.889443] usbcore: registered new interface driver usbfs
[ 4.891523] usbcore: registered new interface driver hub
[ 4.894517] usbcore: registered new device driver usb
[ 4.896323] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.3 (Dec 03, 2009)
[ 4.896360] bnx2 0000:03:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 4.896380] bnx2 0000:03:00.0: setting latency timer to 64
[ 4.896795] bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 4.902335] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.903651] bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 4.910619] eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 40, node addr 18:a9:05:50:2e:12
[ 4.914900] bnx2 0000:03:00.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39
[ 4.917244] bnx2 0000:03:00.1: setting latency timer to 64
[ 4.919516] bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 4.919878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.920557] ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 5
[ 4.920580] ehci_hcd 0000:00:07.2: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5
[ 4.920626] ehci_hcd 0000:00:07.2: EHCI Host Controller
[ 4.920676] ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 4.940686] bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 4.944446] ehci_hcd 0000:00:07.2: irq 5, io mem 0xf3dc0000
[ 4.950820] eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express f
ound at mem f4000000, IRQ 39, node addr 18:a9:05:50:2e:14
[ 4.954421] ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00
[ 4.954470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.954477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.954483] usb usb1: Product: EHCI Host Controller
[ 4.954487] usb usb1: Manufacturer: Linux 2.6.33-grml ehci_hcd
[ 4.954493] usb usb1: SerialNumber: 0000:00:07.2
[ 4.954740] hub 1-0:1.0: USB hub found
[ 4.954750] hub 1-0:1.0: 4 ports detected
[ 4.961683] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.961790] alloc irq_desc for 45 on node -1
[ 4.961795] alloc kstat_irqs on node -1
[ 4.961814] uhci_hcd 0000:00:04.4: PCI INT B -> GSI 45 (level, low) -> IRQ 45
[ 4.961829] uhci_hcd 0000:00:04.4: UHCI Host Controller
[ 4.961849] uhci_hcd 0000:00:04.4: new USB bus registered, assigned bus number 2
[ 4.961872] uhci_hcd 0000:00:04.4: port count misdetected? forcing to 2 ports
[ 4.961892] uhci_hcd 0000:00:04.4: HCRESET not completed yet!
[ 4.961932] uhci_hcd 0000:00:04.4: irq 45, io base 0x00001800
[ 4.962014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.962021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.962026] usb usb2: Product: UHCI Host Controller
[ 4.962030] usb usb2: Manufacturer: Linux 2.6.33-grml uhci_hcd
[ 4.962035] usb usb2: SerialNumber: 0000:00:04.4
[ 4.962246] hub 2-0:1.0: USB hub found
[ 4.962256] hub 2-0:1.0: 2 ports detected
[ 4.999942] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.000004] ohci_hcd 0000:00:07.0: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5
[ 5.000033] ohci_hcd 0000:00:07.0: OHCI Host Controller
[ 5.000052] ohci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 3
[ 5.000082] ohci_hcd 0000:00:07.0: irq 5, io mem 0xf3de0000
[ 5.016722] bnx2 0000:41:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[ 5.020057] bnx2 0000:41:00.0: setting latency timer to 64
[ 5.022581] bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 5.031999] bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 5.041692] eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 34, node addr 18:a9:05:50:2e:0e
[ 5.046294] bnx2 0000:41:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33
[ 5.048964] bnx2 0000:41:00.1: setting latency timer to 64
[ 5.051402] bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 5.054719] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.057237] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.059841] usb usb3: Product: OHCI Host Controller
[ 5.060765] bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 5.064596] usb usb3: Manufacturer: Linux 2.6.33-grml ohci_hcd
[ 5.066793] usb usb3: SerialNumber: 0000:00:07.0
[ 5.067679] eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 33, node addr 18:a9:05:50:2e:10
[ 5.073307] hub 3-0:1.0: USB hub found
[ 5.074830] hub 3-0:1.0: 2 ports detected
[ 5.076407] ohci_hcd 0000:00:07.1: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5
[ 5.079483] ohci_hcd 0000:00:07.1: OHCI Host Controller
[ 5.081468] ohci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 4
[ 5.084275] ohci_hcd 0000:00:07.1: irq 5, io mem 0xf3dd0000
[ 5.140758] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.144037] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.146724] usb usb4: Product: OHCI Host Controller
[ 5.148491] usb usb4: Manufacturer: Linux 2.6.33-grml ohci_hcd
[ 5.150634] usb usb4: SerialNumber: 0000:00:07.1
[ 5.152444] hub 4-0:1.0: USB hub found
[ 5.153881] hub 4-0:1.0: 2 ports detected
+ [ -e /conf/param.conf ]
+ [ = y ]
+ /scripts/init-premount/select_eth_device
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ [ -x /sbin/usplash_write ]
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ maybe_break mount
+ [ = mount ]
+ log_begin_msg Mounting root file system
+ [ -x /sbin/usplash_write ]
+ _log_msg Begin: Mounting root file system ...
+ [ n = y ]
+ printf Begin: Mounting root file system ...
Begin: Mounting root file system ... + . /scripts/live
+ export PATH=/root/usr/bin:/root/usr/sbin:/root/bin:/root/sbin:/usr/bin:/usr/sbin:/bin:/sbin
+ echo /root/lib
+ echo /root/usr/lib
+ mountpoint=/live/image
+ LIVE_MEDIA_PATH=live
+ root_persistence=live-rw
+ home_persistence=home-rw
+ root_snapshot_label=live-sn
+ home_snapshot_label=home-sn
+ USERNAME=user
+ USERFULLNAME=Live user
+ HOSTNAME=host
+ mkdir -p /live/image
+ [ ! -d /etc ]
+ [ ! -f /etc/mtab ]
+ touch /etc/mtab
+ [ -f /etc/live.conf ]
+ . /etc/live.conf
+ export BUILD_SYSTEM=Debian
+ export USERNAME=grml
+ export USERFULLNAME=grml user
+ export HOSTNAME=grml
+ export SELINUX_INIT=No
+ export UNIONTYPE=aufs
+ export USERNAME USERFULLNAME HOSTNAME
+ . /scripts/live-helpers
+ [ ! -x /bin/fstype ]
+ [ -x /s[ 5.366724] usb 2-1: new full speed USB device using uhci_hcd and address 2
bin/udevadm ]
+ udevinfo=/sbin/udevadm info
+ [ ! -f /live.vars ]
+ touch /live.vars
+ parse_numeric
+ return
+ maybe_break mountroot
+ [ = mountroot ]
+ mountroot
+ [ -x /scripts/local-top/cryptroot ]
+ /scripts/local-top/cryptroot
+ exec
+ exec
+ exec
+ exec
+ tailpid=1365
+ . /scripts/live-functions
+ tail+ -f. live.log /scripts/functions
[ 5.424103] kjournald starting. Commit interval 5 seconds
[ 5.424233] EXT3-fs (cciss/c0d0p1): using internal journal
[ 5.424242] EXT3-fs (cciss/c0d0p1): recovery complete
[ 5.424251] EXT3-fs (cciss/c0d0p1): mounted filesystem with writeback data mode
[ 5.444682] loop: module loaded
[ 5.513813] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.516251] ISO 9660 Extensions:
[ 5.516828] usb 2-1: New USB device found, idVendor=03f0, idProduct=1027
[ 5.516836] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.516842] usb 2-1: Product: Virtual Keyboard
[ 5.516846] usb 2-1: Manufacturer: HP
[ 5.527370] RRIP_1991A
[ 5.537851] usbcore: registered new interface driver hiddev
[ 5.545606] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb2/2-1/2-1:1.0/input/input2
[ 5.549942] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:00:04.4-1/input0
[ 5.559558] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb2/2-1/2-1:1.1/input/input3
[ 5.563540] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:00:04.4-1/input1
[ 5.569071] usbcore: registered new interface driver usbhid
[ 5.571107] usbhid: USB HID core driver
* Mounted live system from /dev/loop0
[ 5.683685] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 5.862794] usb 4-1: not running at top speed; connect to a high speed hub
[ 5.868806] usb 4-1: New USB device found, idVendor=04b4, idProduct=6560
[ 5.871386] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.874889] hub 4-1:1.0: USB hub found
[ 5.876803] hub 4-1:1.0: 4 ports detected
+ kill 1365
+ [ -w /root/var/log/ ]
+ log_end_msg
+ [ -x /sbin/usplash_write ]
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ maybe_break bottom
+ [ = bottom ]
+ [ n != y ]
+ log_begin_msg Running /scripts/init-bottom
+ [ -x /sbin/usplash_write ]
+ _log_msg Begin: Running /scripts/init-bottom ...
+ [ n = y ]
+ printf Begin: Running /scripts/init-bottom ...
Begin: Running /scripts/init-bottom ... + run_scripts /scripts/init-bottom
+ initdir=/scripts/init-bottom
+ [ ! -d /scripts/init-bottom ]
+ get_prereqs
+ set_initlist
+ unset initlist
+ [ /scripts/init-bottom/udev = /scripts/init-bottom/* ]
+ [ ! -x /scripts/init-bottom/udev ]
+ [ -d /scripts/init-bottom/udev ]
+ initlist= udev
+ /scripts/init-bottom/udev prereqs
+ tmp=
+ eval array_udev=""
+ array_udev=
+ reduce_prereqs
+ unset runlist
+ set -- udev
+ i=1
+ [ 1 -ne 0 ]
+ oldi=1
+ reduce_satisfied udev
+ render array_udev
+ eval echo -n ${array_udev}
+ echo -n
+ deplist=
+ unset tmpdeplist
+ deplist=
+ eval array_udev=""
+ array_udev=
+ render array_udev
+ eval echo -n ${array_udev}
+ echo -n
+ count_unsatisfied
+ set --
+ return 0
+ cnt=0
+ [ 0 -eq 0 ]
+ runlist= udev
+ pop_list_item udev udev
+ item=udev
+ shift
+ set -- udev
+ unset tmppop
+ [ udev = udev ]
+ continue
+ initlist=
+ i=0
+ [ 0 -eq 1 ]
+ [ 0 -ne 0 ]
+ call_scripts
+ [ = y ]
+ /scripts/init-bottom/udev
mount: mounting /dev on /root/dev failed: No such file or directory
+ [ -e /conf/param.conf ]
+ [ n != y ]
+ log_end_msg
+ [ -x /sbin/usplash_write ]
+ _log_msg done.\n
+ [ n = y ]
+ printf done.\n
done.
+ mount -n -o move /sys /root/sys
mount: mounting /sys on /root/sys failed: No such file or directory
+ mount -n -o move /proc /root/proc
mount: mounting /proc on /root/proc failed: No such file or directory
+ [ -n /sbin/init ]
+ [ ! -x /root/sbin/init ]
+ echo Target filesystem doesn't have /sbin/init.
Target filesystem doesn't have /sbin/init.
+ init=
+ [ -z ]
+ [ ! -x /root/sbin/init ]
+ continue
+ [ ! -x /root/etc/init ]
+ continue
+ [ ! -x /root/bin/init ]
+ continue
+ [ ! -x /root/bin/sh ]
+ continue
+ [ ! -x /root/bin/sh ]
+ panic No init found. Try passing init= bootarg.
+ DEB_1=\033[1;31m .''`. \033[0m
+ DEB_2=\033[1;31m: :' : \033[0m
+ DEB_3=\033[1;31m`. `'` \033[0m
+ DEB_4=\033[1;31m `- \033[0m
+ LIVELOG=\033[1;37m/live.log\033[0m
+ DEBUG=\033[1;37mdebug\033[0m
/init: line 1: 6: Bad file descriptor
+ exec
[ 6.080127] Kernel panic - not syncing: Attempted to kill init!
[ 6.082811] Pid: 1, comm: init Not tainted 2.6.33-grml #1
[ 6.084763] Call Trace:
[ 6.085705] [<c051229f>] ? printk+0x14/0x16
[ 6.087255] [<c05121d8>] panic+0x48/0xfb
[ 6.088853] [<c01399d9>] do_exit+0x61/0x5ff
[ 6.090356] [<c01bd294>] ? filp_close+0x56/0x60
[ 6.092075] [<c0139fde>] do_group_exit+0x67/0x8a
[ 6.093798] [<c013a019>] sys_exit_group+0x18/0x1c
[ 6.095606] [<c05150bc>] syscall_call+0x7/0xb
More information about the Bugs-changes
mailing list